Replacement Cord

A damaged or missing cord shouldn't mean replacing the whole lamp. Our salt lamp replacement cord is a direct solution — professional-grade, UL-listed, and designed specifically for Himalayan salt lamps. Whether your original cord stopped working, was damaged, or you're setting up a lamp that arrived without one, this replacement cord restores full function in minutes.

Salt Lamp Replacement Cord Specifications

• Cord Type: SPT-1 White Candelabra Lamp Cord
• Length: 6 feet (72 inches)
• Safety Certification: UL Listed / UL Approved
• Socket Type: E12 Candelabra Base
• Recommended Bulb: 15-40 watt incandescent (sold separately)
• Attachment: Butterfly Clip / EZ Clip
• Switch: Integrated inline on/off switch
• Color: Classic white

UL-Listed Safety — Why It Matters

Salt lamps run continuously — often 24 hours a day. That makes the quality of the electrical cord more important than it might seem for a lamp you only use occasionally. This replacement salt lamp cord is fully UL-listed, meeting rigorous industry standards for fire safety and electrical stability. The SPT-1 candelabra lamp cord is insulated for durability and rated to handle the consistent heat generated by incandescent salt lamp bulbs over extended use.

Don't replace a faulty cord with an uncertified generic cord. The cost difference is minimal — the safety difference is not.

Universal Butterfly Clip — Fits Most Salt Lamps

The most common reason replacement cords don't work is incompatible socket attachment. This cord uses a spring-loaded butterfly clip — also called a wing clip or EZ clip — that fits the majority of natural formation and hand-carved Himalayan salt lamps on the market.

• Stable positioning: Keeps the bulb centered to prevent uneven heating of the salt crystal
• Easy installation: Pinch the clips to insert or remove — no tools required
• Broad compatibility: Works with most E12 candelabra base salt lamp sockets

If you're unsure whether this cord fits your lamp, the E12 candelabra base is the standard socket used in the vast majority of Himalayan salt lamps sold in the US. Check your existing cord's socket size — if it's E12, this replacement cord will fit.

6-Foot Cord with Integrated Switch

At 6 feet, this Himalayan salt lamp cord replacement gives you enough reach for nightstands, high shelves, mantels, and most placement scenarios without needing an extension cord. The integrated inline switch is positioned for easy access — turn your lamp on and off with a simple click without reaching for the wall outlet.

The white cord finish blends cleanly into most home décor and doesn't draw attention away from the lamp itself.

Is This a Salt Lamp Plug or a Full Cord Replacement?

This is a complete salt lamp cord replacement — the full assembly including the plug, 6-foot cord, inline switch, and E12 candelabra socket with butterfly clip. Everything from the wall outlet to the bulb socket is included. You supply the bulb.

If your lamp's original cord has a damaged plug, frayed wire, broken switch, or failed socket, this replacement covers all of it in one piece. There's no need to source components separately.

Installation

1. Unplug your lamp completely before starting
2. Remove the old cord by pulling the butterfly clip out of the lamp base
3. Screw the replacement bulb into the new cord's E12 socket — hand tight, don't overtighten
4. Pinch the butterfly clip and insert the socket assembly into your lamp's base cavity
5. Release the clip — it will spring open and hold the socket centered in the lamp
6. Route the cord out through the lamp base opening and plug in

For a full walkthrough with photos, see our salt lamp cord installation guide. For bulb selection, see our Salt Lamp Bulb Guide.

Complete Your Setup

• Salt Lamp Bulb Guide — what bulb does your lamp need?
• Care Guide — keeping your lamp in optimal condition
• Shop Salt Lamps — browse our full collection